Many people think that all types of dirt are interchangeable. Although they may look the same on the surface, each type of dirt has its own characteristics. These characteristics make it suitable for specific types of projects. One of the most widely available types of dirt is fill dirt. It has several important uses. Here is a closer look at what fill dirt is and how it can be used.
What Is Fill Dirt?

Fill dirt, which is sometimes referred to simply as “fill”, is a type of dirt that is made of subsoil. Fill dirt is typically found about a foot below the topsoil and consists of partially broken-down soil. Its composition may include sand, clay, stones, silt, and other materials naturally found in the ground. Fill dirt originating from old farm fields, for example, may also contain remnants of previous farming activities.
Although fill dirt might contain some organic material, it is largely inorganic. This makes it the ideal choice for filling spaces as it does not settle or decompose the way that organic soil does. In addition, it also tends to be significantly cheaper than other types of dirt.
Fill dirt should not be confused with fill sand, which may also be used for filling low areas but has very different characteristics. Fill sand is made up of very fine rock particles and is used mostly for improving drainage. However, unlike fill dirt, it is highly vulnerable to displacement and shifting.
Grading
Properties of all types must be graded to an appropriate slope to prevent flooding and other types of damage. Fill dirt is an excellent material for this purpose. The process of gradation, also known as leveling, is used to ensure the ground slopes downward on each side of a building at a rate of around 3 inches for every 10 feet. Failing to take this step can cause water to seep back toward the building. This water weakens the foundation. In addition, it may potentially flood the basement when it rains heavily.
When the grade of a building is found to be inadequate for efficient drainage, fill dirt can be used to correct the situation. First, topsoil is removed from the area using equipment that is appropriate for the job. For example, shovels or rakes may be used for residential properties, while heavier machinery is needed for bigger commercial projects. Then, fill dirt can be added to the areas that must be raised. Afterward, workers put the original topsoil back into place.
Gradation with fill dirt is also appropriate for addressing uneven areas of landscape. For example, activities such as installing septic tanks and removing trees often require gradation to account for settling earth.
Filling in Holes

Fill dirt is a good material for filling in certain types of holes. It works well for holes that are created by activities such as swimming pool removal or tree removal. However, it’s important to keep in mind that if plants or trees will be grown in the area that is being filled, the fill dirt needs to be topped with a layer of topsoil. This will provide plants with the nutrients they need to thrive. Likewise, fill dirt is an acceptable material for raising flower beds but must be topped with rich topsoil to provide proper aeration and drainage, along with nutrients.
Raising a Foundation
If a building is being constructed in an area that is prone to flooding, the area where the foundation is being built can be raised using fill dirt. This helps protect it from water damage. The non-organic makeup of fill dirt makes it suitable for helping the foundation remain stable. This helps even when the area encounters unfavorable weather conditions or flooding.
Preparing a Construction Site
When building a home, building, sidewalk or road, it is necessary to begin with a stable base that can provide it with support. Fill dirt is the ideal material for this purpose, as long as it has been screened and deemed free of organic material. In addition to smoothing over the surface of the project, it can fill in any low spots. These spots may have been created while the ground was being prepared for construction.
Supporting Retaining Walls
When constructing a retaining wall, fill dirt can be used to backfill its uphill side and give it support that can last for several years.
Creating Mounds
There are several reasons that mounds may be created in construction, whether you are building an embankment, terracing a property or building sight barriers that can improve a property’s privacy.
Fill dirt is the perfect material for creating mounds thanks to the fact that it can be easily packed and is not prone to decomposition. In cases where it will form a base for plants or grass, it should be topped with nutrient-rich topsoil to foster growth.
Supporting an Inground Pool
When an inground pool is installed, the ground must be excavated to accommodate the pool cavity. Pool removal contractors use fill dirt to give the pool even support. Therefore, it helps level up the surrounding area.
What Is Clean Fill?

Clean fill is a term given to fill dirt that is free of detectable contaminants as well as rocks. This type of dirt is screened to remove roots and other materials that should not be present. For projects where clean fill is required, it is important to request certification from the supplier that it is indeed clean.
Fill dirt that is used for construction projects has to meet certain specifications for gradation as outlined by the geotechnical engineer of the project. The supplier should provide written confirmation that the fill contains virgin material and that it does not contain any dangerous materials or additives such as wood, glass, metal or rubble.
You can learn more about the composition of a specific sample of dirt by sending it to your county agricultural extension office or a lab for testing.
Reach Out to the Reputable Fill Dirt Suppliers
Ensure you have the right type of high-quality fill dirt for your project by contacting the reputable fill dirt suppliers at Dirt Connections. We provide dirt delivery services to residential and commercial sites throughout the Northern Virginia area. Contact us today to learn more about our services.
Summary

Dirt Connections was started with one goal in mind: providing quality residential and commercial construction services to clients on time and on budget. Reach out for more information on how we can support your next project.
For your convenience our estimates are free and by appointment. Call 703-940-9949 for a free estimate today!
